• All steel or cast iron construction (no external aluminium)
• Design factor: 5:1
• Low Design temperature: -10°C.
• Planetary gear box enclosed in drum for better protection and space saving
• Automatic fail safe disc brake (no adjustment required)
• Plain long drum version (Length 728 mm) (GC)
• All rotating parts mounted on bearings
• Dynamic braking by an external counter balance valve avoiding the permanent friction of the discs brake
• Lifting lugs for easy installation

Technical Data:

• Nominal lifting capacity at top layer: 5 metric tons
• Nominal working pressure: 150 bar (Max. 210 bar)
• Maximum rated oil flow: 142 l/min.
• Maximum speed at top layer: 30 m/min.
• Recommended wire rope diameter: 19 or 20 mm ( Wire is not included)
• Minimum rope breaking strength: 20 ton
• Working rope capacity: 188 meters (4 layers)
• Full drum storage rope capacity: 309 m (6 layers)
• Weight of winch without rope: approx.880 kg

Controls :

• Dual control : lever and joystick control with 4 meters control length

Options included

• Drum guard (Option G)
• Offshore paint and sandblasting (option QZ)
• 188 m of 20 mm diam wire rope with thimble and sleeve, spooled on the winch

• All steel or stainless steel construction.
• Compact design
• Design factor 10:1 on main load bearing components
• Design temperature: -20°C
• Planetary gear box enclosed in drum for better protection and space saving
• Gear type air motor
• High efficiency planetary gearing inside drum for better protection and minimum overall dimensions
• All rotating parts are supported on ball and/or needle bearings
• One internal automatic multidisc brake springs applied, pressure released
• One external automatic drum band brake spring applied, pressure released
• Helical grooved drum (for wire rope diameter 10 mm)
• Local throttle control with automatic return to neutral position and locks when released.
• Main power emergency stop device
• Overload protection device adjusted during factory tests
• 3 way valve with 2 air inlets. Secondary air inlet to be connected by the customer to an auxiliary power supply source on site (e.g. a nitrogen bottle) for emergency operation in case of main power failure.
• Emergency lowering system (2 litre tank releasing both brakes)
• Slack wire detector
• Adjustable upper and lower limit switches inside the drum
• Assisting spooling device for better rope winding at no load (Press roller)
• Stainless steel drum guards
• Marine Paint (150 microns)
• Water separator-Filter-Regulator-Lubricator set
• Lifting lugs for easy installation "DNV" Type approved design
• CE marking and ATEX marking for Zone 1 and 2 (EX II 2 GD c IIB 135°C X)

Technical Data with 6.3 dynamic working pressure:

• Nominal lifting capacity at 2nd rated layer: 150 kg
• Working pressure range: 5 to 7 bar
• Lifting speed at rated load: 0 to 30 m/min.
• Free air consumption: 0 to 2.5 m3/min
• Wire rope diameter: 10 mm (not included in this quote)
• Working rope capacity: 54 meters (on 2 layers)
• Full drum storage rope capacity: 152 m (on 5 layers)
• Weight of winch (without rope): approx.210 kg

Options included:

• 150 m of 10 mm diameter non rotating, galvanized wire rope equipped with a thimble and sleeved at one end, spooled on the winch at factory

• All steel base and drum
• Design Factor: 5:1
• Design Temperature: 0 degrees C.
• Motor Type: Piston
• Gearing: Planetary
• Paint: Standard IR yellow finish paint.

Specifications (at 90 psi / 6.3 bar at air inlet):

• Line Pull Rating: 5,000 lbs. (2,273 kg) on top layer
• Stall Pull: 10,277 lbs. (4,671 kg) on first layer
• Line Speed: Variable; 0 - 132 fpm (40 m/min)
• Motor H.P: 25 HP
• Flow: 700 cfm (20 m3/min)
• Brake(s): Automatic disc
• Drum Length: 24 inch is standard
• Inlet Size: 1-1/4 inch NPT
• Exhaust Size: 2-1/2 inch NPT
• Recommended Wire Rope Size: 5/8” diameter Drum Storage Capacity: 843 feet (255 m) with 5/8 inch (16mm) dia. wire rope on 6 layers with a 24 inch long drum. Wire rope not included unless otherwise noted. *Recommended wire rope working capacity is 80% of the value shown above.
• Air Supply Hose: 1-1 /2 inch I.D. (recommended; not included)
• Noise Level: 86 dBA (at full rated line pull, lifting)
• Testing: 125% SWL per standard IR test procedure
• Weight: (estimated): Shipping 481 kg

Controls:

• ‘Lift and Shift’ winch mounted throttle lever.

Options included:

• Airline Accessories (J12): Filter, lubricator
• CE / ATEX Compliance (CE): Includes drum guard, overload protection, emergency stop, limit switch, muffler and CE / ATEX marking / documentation. Ex II 2 GD c 200°C X

• Packaging: Standard is cardboard box.
• Documentation: Test certificate and manuals are provided as standard. Standard general arrangement and air schematic drawings are available at no charge upon request

• All steel base and drum
• Design Factor: 5:1
• Design Temperature: 0 degrees C.
• Motor Type: Piston
• Gearing: Planetary
• Paint: Standard IR yellow finish paint.

Specifications (at 90 psi / 6.3 bar at air inlet):

• Line Pull Rating: 5,000 lbs. (2,273 kg) on top layer
• Stall Pull: 10,277 lbs. (4,671 kg) on first layer
• Line Speed: Variable; 0 - 132 fpm (40 m/min)
• Motor H.P: 25 HP
• Flow: 700 cfm (20 m3/min)
• Brake(s): Automatic disc
• Drum Length: 24 inch is standard
• Inlet Size: 1-1/4 inch NPT
• Exhaust Size: 2-1/2 inch NPT
• Recommended Wire Rope Size: 5/8” diameter Drum Storage Capacity: 843 feet (255 m) with 5/8 inch (16mm) dia. wire rope on 6 layers with a 24 inch long drum. Wire rope not included unless otherwise noted. *Recommended wire rope working capacity is 80% of the value shown above.
• Air Supply Hose: 1-1 /2 inch I.D. (recommended; not included)
• Noise Level: 86 dBA (at full rated line pull, lifting)
• Testing: 125% SWL per standard IR test procedure
• Weight: (estimated): Shipping 481 kg

Controls:

• ‘Lift and Shift’ winch mounted throttle lever.

Options included:

• Airline Accessories (J12): Filter, lubricator
• CE / ATEX Compliance (CE): Includes drum guard, overload protection, emergency stop, limit switch, muffler and CE / ATEX marking / documentation. Ex II 2 GD c 200°C X

• Packaging: Standard is cardboard box.
• Documentation: Test certificate and manuals are provided as standard. Standard general arrangement and air schematic drawings are available at no charge upon request

• Line Pull Rating: 20 metric ton (44,000 lbs.) on full drum
• Brake Capacity: 30,000 kg (66,000 lbs.) full drum
• Line Speed: 4m/min (13 fpm) on full drum
• Wire Rope Storage Capacity: 845 feet (261 mts) with 1-1/8 inch (28mm) dia. on 6th layer. *Recommended wire rope working capacity is 80% of the above value.

• Construction: All steel base and drum
• Design Factor: 5:1
• Design Temperature: 0 degrees C.
• Motor Type: Piston Motor H.P: 25 HP
• Gearing: Planetary Brake(s): Auto Drum and Auto Disc Brake
• Drum Length: 24 inch is standard
• Drum Winding: Overwound
• Inlet Size: 1-1/4 inch NPT
• Exhaust Size: 2-1/2 inch NPT

• Mounted Lever Throttle

• Pressure: 87 psig (6 bar) at the air inlet (dynamic)
• Flow: 960 cfm
• Air Supply Hose: 1-1/2 inch I.D. (recommended; not included)
• Noise Level: 98 dBA (at full rated line pull, lifting)

1. Testing: 125% SWL per standard IR test procedure
2. Paint: Spray Painting: As per painting spec – 4600-WB-ST-TS-005
3. Packaging: Wood crating (standard for international shipments).
4. Documentation: Test certificate are provided as standard. Standard general arrangement and air schematic drawings are available at no charge upon request.

• Drum Guard
• Special Paint
• Wire Rope: 50 Meters (164ft) of 1-1/8 inch (28mm) dia galvanized steel wire rope.
• Air Accessories: - Filter - Lubricator - Muffler

• Construction: All steel base and drum
• Design Factor: 5:1
• Design Temperature: 0 degrees C.
• Motor Type: Piston
• Gearing: Planetary
• Paint: Standard IR yellow finish paint.

• Line Pull Rating: 11,000 lbs. (5,000 kg) on top layer
• Stall Pull: 23,594 lbs. (10,725 kg) on first layer
• Line Speed: Variable; 0 - 54 fpm (16.5 m/min) on top layer
• Motor H.P: 25 HP
• Flow: 700 cfm (20 m3/min)
• Brake(s): Automatic disc
• Drum Length: 24 inch is standard
• Inlet Size: 1-1/4 inch NPT
• Exhaust Size: 2-1/2 inch NPT
• Recommended Wire Rope Size: ¾” (19mm) diameter
• Drum Storage Capacity: 1,346 feet (410 m) with 3/4 inch (19mm) dia. wire rope on 8 layers for a 24 inch long drum. Wire rope not included unless otherwise noted. *Recommended wire rope working capacity is 80% of the above value.
• Air Supply Hose: 1-1/2 inch I.D. (recommended; not supplied)
• Noise Level: 98 dBA (at full rated line pull, lifting)
• Testing: 125% SWL per standard IR test procedure
• Weight: (estimated): Shipping 849 kg

• ‘Lift and Shift’ winch mounted throttle lever

• Drum Guard , option G
• Filter lubricator regulator, option J123
• Marine 812 finish paint, option P

• Packaging: Standard is cardboard box. Wood crating is optional (standard for international shipments)
• Documentation: Test certificate and manuals are provided as standard. Standard general arrangement and air schematic drawings are available at no charge upon request. ABS or DNV fully certified units will include a full Ingersoll Rand data book. Additional documentation may be available upon request for an additional price.

• Compact and robust steel construction (no external aluminium)
• Design factor: 5:1 Design temperature: -20°C.
• Automatic fail safe disc brake (no adjustment required)
• Reliable gear type air motor – Flame proof by nature
• High efficiency planetary gear box
• Top and bottom limit switches
• Main air emergency stop button
• Drum guard
• Overload protection device adjusted at factory during load tests Standard
• IR yellow finish paint
• CE Marking (Compliant with European Standard EN 14492-1)
• ATEX marking for Surface Industry – Zone 2: (Ex II 3G Ex h IIB T4 Gc X / Ex II 3D Ex h IIIC T135°C Dc X)

• Working Pressure Range : from 5 to 7 bar
• Rated Lifting Capacity: 1500kg at 1st layer / 1500 kg at top layer
• Line Speed at rated load: 0 to 9.5 m/min.
• Free Air Consumption at rated load: 4.8m3/min
• Air Inlet Size: ¾” BSP
• Recommended Wire Rope Diameter: 10 mm
• Working Rope Capacity: 36 m on 3 layers
• Full Drum Storage Rope Capacity: 66 m on 5 layers
• Weight without rope: 85 kg net

• 2 button progressive remote pendent control with main air emergency stop button (as per EN418)
• Remote control length: 6 m

• Construction: All steel base and drum
• Design Factor: 5:1 * Design Temperature: 0 degrees C.
• Motor Type: Piston * Gearing: Planetary
• Paint: Standard IR yellow finish paint.

• Line Pull Rating: 11,000 lbs. (5,000 kg) on top layer
• Stall Pull: 23,594 lbs. (10,725 kg) on first layer
• Line Speed: Variable; 0 - 54 fpm (16.5 m/min) on top layer
• Motor H.P: 25 HP
• Flow: 700 cfm (20 m3/min)
• Brake(s): Automatic disc
• Drum Length: 24 inch
• Inlet Size: 1-1/4 inch NPT * Exhaust Size: 2-1/2 inch NPT
• Recommended Wire Rope Size: ¾” (19mm) diameter
• Drum Storage Capacity: 1,346 feet (410 m) with 3/4 inch (19mm) dia. wire rope on 8 layers for a 24 inch long drum. Wire rope not included unless otherwise noted.
• Recommended wire rope working capacity is 80% of the above value.
• Air Supply Hose: 1-1/2 inch I.D. (recommended; not supplied)
• Noise Level: 98 dBA (at full rated line pull, lifting)
• Testing: 125% SWL per standard IR test procedure
• Weight: (estimated): Net: 1872/849 lbs/kg;

• Filter lubricator (J12)
• CE / ATEX Compliance (CE): Includes drum guard, overload protection, emergency stop, limit switch, muffler and CE / ATEX marking / documentation (Ex II 2 GD c 200°C X)

• Packaging: Standard is cardboard box. Wood crating is optional (standard for international shipments)
• Documentation: Test certificate and manuals for Ingersoll Rand Air Winch FA5i-24XK1J12-CE are provided as standard. Standard general arrangement and air schematic drawings for Ingersoll Rand Air Winch FA5i-24XK1J12-CE are available at no charge upon request. ABS or DNV fully certified units will include a full Ingersoll Rand data book. Additional documentation may be available upon request for an additional price.